Photos Coming October 2026
Project Overview
Texas Electric and Light is handling the complete commercial electrical installation for Comet Cleaners' Cedar Park location. Dry cleaning operations present unique electrical demands — commercial cleaning equipment, pressing machines, steam systems, and specialty lighting all require careful circuit planning and dedicated power.
This project involves coordinating the full electrical scope for both the customer-facing retail front end and the production floor behind it. The front end requires clean retail lighting and POS circuits; the back requires robust, dedicated circuits for heavy commercial equipment that runs continuously throughout the business day.
Comet Cleaners is an established Texas dry cleaning brand, and this Cedar Park location needs electrical systems that can handle the demands of full commercial production from the first day of operation.
Scope of Work
Electrical Service & Distribution
- • Commercial electrical service installation
- • Main distribution panel sized for equipment loads
- • Sub-panels for equipment and retail zones
- • Full load calculations for dry cleaning equipment
- • Oncor utility coordination
Equipment Power Circuits
- • Dedicated circuits for dry cleaning machines
- • Pressing and finishing equipment circuits
- • Steam generator and boiler electrical
- • Conveyor system power
- • High-capacity 240V equipment circuits
Retail Front End Electrical
- • Customer area lighting and ambiance
- • POS and register circuits
- • Counter and check-in area power
- • Exterior signage electrical
- • Emergency and exit lighting
Production Floor Systems
- • Production area general lighting
- • Equipment area receptacles and circuits
- • Ventilation and exhaust fan electrical
- • HVAC electrical for production area
- • Safety and code compliance circuits
Permits & Code Compliance
- • City of Cedar Park electrical permit
- • Rough-in and final inspections
- • Health and fire department electrical compliance
- • Certificate of occupancy signoff
- • Code documentation for equipment circuits
GC Coordination
- • Full coordination with general contractor
- • Equipment vendor electrical coordination
- • Rough-in during framing phase
- • Trim-out and device installation
- • Final testing and commissioning
Project Considerations
High-Demand Equipment Loads
Commercial dry cleaning equipment draws significant power — often 200-400 amps of dedicated capacity for the production floor alone. Proper panel sizing, load calculations, and circuit design are critical to ensure the facility runs without electrical issues.
Simultaneous Retail and Production Electrical
The retail front end and production floor have completely different electrical needs. Coordinating both zones in one installation while maintaining separation for code compliance requires careful planning in the rough-in phase.
Equipment Coordination
Dry cleaning equipment vendors have specific electrical requirements for each machine. We coordinate directly with the equipment supplier to ensure every circuit meets the exact voltage, amperage, and connection specifications for each piece of equipment.
Project at a Glance
Project Details
- Client
- Comet Cleaners
- Project Type
- Commercial TI
- Location
- Cedar Park, TX
- Status
- In Progress — Oct 2026
- Property Type
- Dry Cleaning / Retail
- Services
- Full Electrical Buildout
- Permit Jurisdiction
- City of Cedar Park
- License
- TECL #28315
Have a Similar Project?
We handle complete commercial electrical buildouts for dry cleaners, retail stores, and specialty commercial tenants throughout Austin and Central Texas.
Call (512) 547-4130 Request a QuoteService Area
See our Cedar Park service page →